Dell 9.7(0.0) manual Access-list, Cpu-qos

Parameters

Defaults

Command Modes

Command History

Usage Information

Example

access-list-	Enter a text string as the MAC access list name, up to 140
name	characters.
cpu-qos	Enter the keywords cpu-qosto assign this ACL to control
	plane traffic only (CoPP).
none
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.10.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.8.1.0Increased the name string to accept up to 140 characters. Prior to 7.8.1.0, names were up to 16 characters long.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.1.1.0Introduced on the E-Series.

The number of entries allowed per ACL is hardware-dependent. For detailed specifications about entries allowed per ACL, refer to your line card documentation.

Prior to 7.8.1.0, names are up to 16 characters long.

Dell(conf)#mac-access-list access-list extended TestMATExt Dell(config-ext-macl)#remark 5 IPv4 Dell(config-ext-macl)#seq 10 permit any any ev2 eq 800 count bytes

Dell(config-ext-macl)#remark 15 ARP Dell(config-ext-macl)#seq 20 permit any any ev2 eq 806 count bytes

Dell(config-ext-macl)#remark 25 IPv6 Dell(config-ext-macl)#seq 30 permit any any ev2 eq 86dd count bytes

Dell(config-ext-macl)#seq 40 permit any any count bytes Dell(config-ext-macl)#exit

Dell(conf)#do show mac accounting access-list snickers

234 Access Control Lists (ACL)