Command Modes

Command History

interface

(OPTIONAL) Identifies the interface type slot/port as one of

 

the following:

 

• For a 10-Gigabit Ethernet interface, enter the keyword

 

TenGigabitEthernet then the slot/port information.

 

• For a 40-Gigabit Ethernet interface, enter the keyword

 

fortyGigE then the slot/port information.

 

• For a port channel interface, enter the keywords port-

 

channel then a number.

 

• For a VLAN interface, enter the keyword vlan then a

 

number from 1 to 4094.

EXEC Privilege

 

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Added support for VRF. Introduced on the S6000-ON.

9.2(0.2)

Introduced on the Z9000.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

debug isis local-updates

To debug IS-IS local update packets, enable debugging on a specific interface and provides diagnostic information.

S6000

Syntaxdebug isis [vrf vrf-name] local-updates [interface]

To turn off debugging, use the no debug isis [vrf vrf—name] updates [interface] command.

Parameters

(OPTIONAL) Enter the keyword vrf followed by the name of

vrf vrf-name

 

the VRF to enable the debugging information on IS-IS

 

corresponding to that VRF. This information contains local

 

updates tied to the VRF that you specify. This command

 

displays the local LSP debugging details of the current unit.

Intermediate System to Intermediate System (IS-IS)

847

Page 847
Image 847
Dell 9.7(0.0) manual Debug isis local-updates, Syntaxdebug isis vrf vrf-name local-updates interface