Dell 9.7(0.0) manual Monitor session, Session-ID, Rpm, Erpm

Command History

Related Commands

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.5(0.0)	Introduced on the Z9500.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.7.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-7.7.1.0 Introduced on the E-Series.

monitor session — enables a monitoring session.

monitor session

Create a session for monitoring traffic with port monitoring.

Syntaxmonitor session session-ID[type { rpm erpm [set ip dscp dscp_value set ip ttl ttl_value]}]

To delete a session, use the no monitor session session-IDcommand. To delete all monitor sessions, use the no monitor session all command.

Parameters	Enter a session identification number. The range is from 0 to
session-ID
	65535.
type	Specifies one of the following type:
	•	rpm
	•	erpm
rpm	Creates a remote port monitoring (rpm) session.
erpm	Creates an encapsulated remote port monitoring (erpm)
	session.

Port Monitoring 1215