Dell 9.7(0.0) manual Sflow extended-switch enable

Command Modes

Command History

Usage Information

Related Commands

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.7(0.0)	Introduced on the S-Series, Z-Series, and MXL switch.

When you enable ingress sFlow on an interface, flow sampling is done on any incoming traffic.

NOTE: After a physical port is a member of a LAG, it inherits the sFlow configuration from the LAG port.

sflow enable (Global) — turns sFlow globally.

sflow extended-switch enable

Enable packing information on a switch only.

Syntax sflow extended-switch enable

Parameters

Defaults

Command Modes

Command History

To disable packing information, use the no sflow extended-switch [enable] command.

enable	Enter the keyword enable to enable global extended
	information.
Disabled.
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

sFlow 1467