Dell 9.7(0.0) manual Show cam-acl, Usage Information Example VersionDescription 70.0, L2PT

show cam-acl

Display the details of the CAM profiles on the chassis and all stack units.

S6000

Syntax	show cam-acl
Defaults	none
Command	EXEC Privilege
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.

Usage Information

Example

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the C-Series.

The display reflects the settings implemented with the cam-aclcommand.

Dell#show cam-acl

-- Chassis Cam ACL --

	Current Settings(in block sizes)
L2Acl	:	1 block = 128 entries
		6
Ipv4Acl	:	4
Ipv6Acl	:	0
Ipv4Qos	:	2
L2Qos	:	1
L2PT	:	0
IpMacAcl	:	0
VmanQos	:	0
VmanDualQos	:	0
EcfmAcl	:	0
FcoeAcl	:	0
iscsiOptAcl	:	0
ipv4pbr	:	0
vrfv4Acl	:	0
Openflow	:	0
fedgovacl	:	0

nlbclusteracl: 0

-- stack-unit 0 --

Current Settings(in block sizes)

Content Addressable Memory (CAM) 465