Dell 9.7(0.0) manual Debug vrrp, Bfd database interface ipv6 packets state timer

VersionDescription

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

6.2.1.1Introduced on the E-Series.

Example	Dell#clear	counters vrrp vrf jay
	Clear "show vrrp" counters of all vrrp groups on all
	interfaces	in VRF jay [confirm] yes

debug vrrp

Allows you to enable debugging of VRRP.

Syntaxdebug vrrp interface [vrrp-id] {all bfd database interface ipv6 packets state timer}

To disable debugging, use the no debug vrrp interface [vrrp-id] {all

bfd database interface ipv6 packets state timer}

command.
Parameters	Enter the following keywords and slot/port or number
interface
	information
	• For Port Channel interface types, enter the keywords
	port-channelthen the number. The range is from 1 to
	128.
	• For a 10-Gigabit Ethernet interface, enter the keyword
	TenGigabitEthernet then the slot/port information.
	• For a 40-Gigabit Ethernet interface, enter the keyword
	fortyGigE then the slot/port information.
	• For a VLAN interface, enter the keyword vlan then the
	VLAN ID. The VLAN ID range is from 1 to 4094.
vrrp-id	(OPTIONAL) Enter a number from 1 to 255 as the VRRP
	group ID.
all	Enter the keyword all to enable debugging of all VRRP
	groups.
bfd	Enter the keyword bfd to enable debugging of VRRP BFD
	interactions.
database	Enter the keyword database to enable debugging of
	configuration changes.
interface	Enter the keyword interface to enable debugging of
	interface state changes..
ipv6	Enter the keyword ipv6 to enable debugging for IPv6.

Virtual Router Redundancy Protocol (VRRP) 1663