Dell 9.7(0.0) manual Sflow polling-interval Interface

Related	sflow polling-interval (Interface) — sets the polling interval for an interface.
Commands

sflow polling-interval (Interface)

Set the sFlow polling interval at an interface (overrides the global-level setting.)

Syntax sflow polling-interval interval value

Parameters

Defaults

Command Modes

Command History

Usage Information

Related Commands

To return to the default, use the no sflow polling-intervalinterval command.

interval value Enter the interval value in seconds. The range is from 15 to 86400 seconds. The default is the global counter polling interval.

The same value as the current global default counter polling interval.

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.2.1.0Introduced on S-Series Stacking.

8.1.1.0Introduced on the E-Series ExaScale.

7.7.1.0Introduced on the S-Series.

7.6.1.0Introduced on the C-Series.

7.4.1.0Introduced on the E-Series.

This command sets the counter polling interval for an interface.

sflow polling-interval (Global) — globally sets the polling interval.

1470 sFlow