Loewe 32 HD, 32HD/DR, SL 37 HD Daily handling, Remote control RC3, Switching on/off, TV equipment

Daily handling

Remote control RC3

Remote control for operating different Loewe units.

DVD	TV
	STB
VCR	Operating the TV:
	Set the rotary switch to ÓTVÓ.

Use the drive buttons in TV- and STB position for VCR, DVD or Digital Recorder You can switch over the six drive buttons both for TV and STB for operating a VCR or DVD player/recorder. Operation of the built-in Digital Recorder Plus is specified ex-factory.

Switching on/off

Your TV set is equipped with an economy standby power supply unit. On standby the power consumption drops to low power. If you want to save even more electricity, switch the set off at the On/Off switch (Signal Box).

Ex-factory settings are: Loewe video recorder, Loewe DVD recorder and for STB (Set Top Box) the d-box common in Germany.

The remote control must be switched for operating a Loewe DVD player.

TV equipment

Functions marked by ✳ are not available in all types of TV sets but can usually be retrofitted. Ask your dealer if you are interested.

Menu contents may differ from the ones shown depending on your TV equipment.

Operation of the ÓPhotoViewer functionsÓ or the ÓDigital RecorderÓ, if available, are described in a separate operating manual.

	You can show your TV
	equipment by pressing the
	INFO button on the remote
	control.
OK	Select the ÓEquipmentÓ line in
	the ÓMain informationÓ menu.
OK	Press the OK button.
	Hide the menu again with the
	END button.

10

TV

DVD STB

VCR

EPG

AV

jkl

def

wxyz

TV

DVD STB

VCR

PIP

First turn the switch to the main function TV or STB.

Press the END and * EPG but- tons at the same time (5 secs). The display at the top left of the remote control flashes twice.

Enter the numbers 988 one after the other. The display again flashes twice.

Now turn the switch to the required function for the drive buttons. DVD, VCR or TV if the Digital Recorder is to be used.

Press the # PIP button to com- plete the setting. The display flashes twice.

The setting is saved.

But remember that EPG data will then be lost and timed recordings will not be made.

	When the TV is switched on,
	you can switch it to standby
	with the blue on/off button.
	The red standby indicator on
	the set
	lights up. If the green indicator
	is also alight a timer recording
	on the VCR is in progress, EPG
	data input is taking place or
	radio mode without on-screen
	display is active.
	From standby it is best to
	switch back on with the blue
	On/Off button or with a
	numeric key (station 0-9). The
	green (blue) operating LED
	then lights up.
	When you switch on the TV
OK	with OK, you see the station
	table and can choose a station.

None of the indicators lights up when you switch off the TV set with the On/Off button on the set.

Switch on the TV set with the On/Off button on the set when it is switched off.

31963_021_RC3_GB 10 14.01.2005, 10:40 Uhr