Operating additional equipment
Audio output ”DIGITAL OUT”
The digital audio signal is applied at the ÓDIGITAL OUTÓ socket of the Signal Box. Here, for example, you can connect an external Dolby Digital Decoder or the Loewe sound system ÓCertos/ConcertosÓ.
An analog audio signal from the TV set or a VCR or another sound source which is received at one of the
The digital signal from the DVD player is output unchanged at this socket.
The digital TV sound or the sound of a DVD/CD player is only audible through a Digital Receiver or the Concertos or Certos system.
AV-connection/Select device
| Press the key 0 on the remote |
AV | |
| control a little longer; the AV |
| selection bar is displayed again. |
Converting the remote control in order to operate a Loewe DVD player or devices from other manufacturers
You can switch over the remote control for VCRs, DVD players and Set Top Boxes if the infrared code of the equipment type is listed in the code list or is in the code memory of the RC3. Switching over is done on the one hand by entering a
If you cannot find the equipment in the code list, try a suggestion from the remote control.
Even if the manufacturer of the equipment is included in the code list, it is possible that it cannot be operated. Not all functions on the RC3 are available for this equipment.
Switching over the remote control – with code input – e.g. to the Loewe DVD player
Look for the code number of your equipment in the code list. The list is sorted according to equipment type Ð DVD, VCR, STB Ð and alpha- betically according to manufacturer. You will find one or more code numbers next to the manufac- turer name.
Once the code has been accepted with two flashes, you can test the functionality of the device you have just programmed.
If the device cannot be operated or is difficult to operate, repeat the code input with the next code from the list. If no other codes are specified for this manufacturer, try a code suggested by the remote control.
Switching over the remote control – with the suggestions by the remote control (see page
Switch on the device to which you want to set the remote control. Standby is not sufficient!
DVD | STB | Using the switch select whether |
| TV |
|
VCR |
| you want to switch over to a VCR, |
|
| DVD player or a Set Top Box. |
| EPG | Press the END and * EPG but- |
| tons at the same time (5 secs). | |
|
| The display at the top left of the |
|
| remote control flashes twice. |
| wxyz | Enter the numbers 991 one after |
|
| |
| wxyz | the other. The display flashes |
|
| once after each number is |
|
| entered. |
AV Selection | VIDEO | AV1 AV2 AVS VGA/XGA DVI COMP.IN |
| Select the AV connection to | |
OK | which the sound source, such as | |
| the DVD player, is connected. |
TV
DVD STB
VCR
EPG
AV
jkl
def
wxyz
Using the switch select whether you want to switch over to a VCR, DVD player or a Set Top Box.
Press the END and * EPG buttons at the same time (5 secs). The display at the top left of the remote control flashes twice.
Enter the four numbers from the code list one after the other (0539 for Loewe DVD player). The display flashes once after each number is entered. Twice after the last number.
If the number was incorrect, the display flashes for longer. The code number has not been accepted.
PIP Press the # PIP button to select the first code.
Hold the remote control pointed towards the device you want to switch over to. Watch the device.
Now press the (Play) or O (On/Off) button on the remote control.
Wait a moment for the reaction of the device. If the device does not react, the code is incorrect.
PIP Press the # PIP button to call the next code.
Press the (Play) or O (On/Off) button again.
EPG | If the device reacts, press the |
*EPG button to confirm the code.
24
31963_021_RC3_GB | 24 | 14.01.2005, 10:40 Uhr |