Loewe SL 37HD/DR+, 32 HD, 32HD/DR, SL 37 HD What to do when, Problem, Possible cause, Remedy

What to do when ...

Problem	Possible cause	Remedy
Various menu items cannot be called (shown in	"Simplified operation" activated in the main	Deactivate ÒSimple controlÓ in the Main
gray) or the menus for the EPG and teletext	information.	Information, press the i-key, select ÒSelect
modes of operation cannot be called		control levelÓ and call up with OK. Set ÒSimple
		controlÓ to ÒnoÓ.
Record and Timer are not displayed in the video	No VCR or DVD recorder logged in and no	Log in VCR in the TV menu - Connections.
menu	digital recorder installed
"Connections" for example cannot be called in	a) A timer recording is in progress (not with	a) Wait until the timer recording has ended or
the video menu (grayed out)	serial timer recording)	clear the timer.
	b) You are recording from the TV set with the	b) Stop recording.
	video bar
In the TV menu, the menu item ÒProgramsÓ is	The child lock is activated. If these menus were	Deactivate program-related child lock: Switch
missing and in the Main Information the item	accessible, children could still set the programs.	off child lock or enter PIN in the TV menu -
ÒAutomatic channel searchÓ and connections		Settings.
Control of the Loewe VCR with the video	a) The VCR's Digital Link function is not	a) Activate Digital Link in the VCR (see
control bar and the timer does not work or	activated or not possible	operating instructions of the VCR)
does not work properly	b) Euro-AV cable not connected	b) Connect the Euro-AV cable
	c) Video recorder not logged in	c) Log in the VCR
General problems with connecting external	a) The device is not logged in in the	a) Compare the connection diagram with the
devices through an AV input	"Connections" menu or is connected	actual installation in the "Main information"
	differently to shown in the connection	under "Connections" and connect as shown if
	diagram	necessary.
	b) The AV norm is set incorrectly	b) Set the correct norm.
	c) The AV signal is set incorrectly	c) Set the correct AV signal.
		If "Automatic" is set for AV norm or AV signal,
		this can lead to wrong detection in the case of
		non-standardized signals. In this case the norm
		and signal must be set according to the
		operating instructions of the external device.

32

31963_021_RC3_GB 32 14.01.2005, 10:40 Uhr