Loewe 37 HD Rotating the TV set, Viewing angle, range of rotation, Operating additional equipment

Operating additional equipment

Rotating the TV set

(Only possible for Spheros 32/37 HD and equipped with ÓMotor UnitÓ).

If the screen is mounted on a "Motor Unit" you can rotate it with the remote control to suit your sitting position.

Launch the TV menu:

Press MENU on the remote control.

OK Select the ÓRotate TVÓ bar.

You determine the direction of

OK rotation right, stop or left with the arrows on the button.

Close the menu.

Note:

Do not place any objects in the range of rotation of the TV set which could obstruct rotation or be knocked over in the process. Before activating the rotary function, make sure that the set can rotate freely and unhindered.

Viewing angle, range of rotation

Setting the rotation area (a maximum of +/- 40 degrees)

With this menu, you can determine the maximum rotation to the left and right.

Press MENU on the remote control.

OK	Highlight the ÓSettingsÓ bar.
OK	Press OK, then to Óother...Ó
OK	Highlight the ÓRotate TVÓ bar,
	press OK.
OK	Select line "Basic adjustment".
OK	Press the OK button.
	You set the desired maximum
OK	range of rotation to the right
	by pressing the ring (right).
	Rotation stops when you
	release the ring.

Determining the switch off position

Here you determine the position of the screen (TV set) which is adopted when switching off providing you have activated this function.

	Press MENU on the remote
	control.
OK	Highlight the ÓSettingsÓ bar.
OK	Press OK, then to Óother...Ó
OK	Highlight the ÓRotate TVÓ bar,
	press OK.
	The menu "Rotate TVÒ
OK	appears. Select
	Define "Switch-off position".
	You set the desired switch off
OK	position to the right or left by
	pressing the ring.
	Rotation stops when you
	release the button.
OK	Save the "set switch-off
	positionÒ with OK.

OK

The setting is saved by pressing

OK .

	Then set the desired maximum
OK	rotation to the left by pressing
	the ring (left).

OK Confirm with OK.

Press END to exit the menu.

26

31963_021_RC3_GB 26 14.01.2005, 10:40 Uhr