Loewe SL 32HD/DR+, 32 HD, SL 37 HD manual Operation of additional equipment, Video playback, IR-Link

Operation of additional equipment

Video playback

There are several ways to see the picture and hear the sound of the VCR, DVD player or camcorder on your TV:

1.Use the Euro-AV sockets on the signal box and VCR. This is the best way to get a good picture and sound quality. For camcorders it is best to use the front sockets AVS.

If you are playing back from a VCR with Digital Link Plus, the VCR picture is shown on the current station slot.

If you are playing back from a standard VCR, DVD player or camcorder, select the AV socket to which the video signal is connected in the AV selection list or the station table.

Video recorders emit a switching voltage during playback which the TV set can decode (can be activated for every VCR in the connection wizard or set Settings - AV Settings - Allow switching voltage to "Yes" in the TV menu). Then the VCR picture is shown on the current station slot as in Digital Link Plus VCR's.

2.You can also control logged in Loewe VCRs and DVD players with the video menu bar. See page 11/20 for more details.

3.Use the antenna connection between the VCR and the signal box. The sound is only transmitted in mono. Select the first menu item, e.g. VIDEO, in the AV selection.

Calling an AV program in the AV selection list

	AV				Call AV selection list
AV Selection				VIDEO		AV1 AV2 AVS VGA/XGA DVI					COMP.IN
					Select AV connection (e.g.
	OK				socket AV1) or VIDEO for the
					VCR station.
Now you will see the playback from the
connected AV unit.
Calling an AV in the station table
	OK				Call the station table
			Channel overview: TV							Numerical
				AVS			6 S–RTL
				AV3			7	N–TV
				AV2			8	DSF
				AV1			9	TM3
		0		VIDEO			10	PRO7
		1		ARD			11	RTL 2
		2		ZDF			12	WDR 3
		3		SAT.1			13	BR 3
		4		RTL			14	HR
		5		VOX			15	MDR 3
							0 ... 9	Select program:
				Select and					DR archive		INFO Info
			OK press OK to proceed						Change programs		MENUMenu
									Favourite programs		END End
									Change sorting

In the numeric sorting you will always find the AV devices at the top of the list without station numbers.

OK Select the AV connection and...

IR-Link

ÓIR-LinkÓ enables you to operate a concealed d-Box or a video recorder from another manufacturer with its remote control via the TV set.

The ÓSignal BoxÓ is equipped with a connection socket (IR-Link) for this purpose. You will need an ÓIR-Link cableÓ which is obtainable from Loewe.

Plug the jack plug of the cable with infrared transmitting diode into the IR-Link socket on the back of the signal box. The infrared transmitting diode at the end of this cable must be placed in front of the concealed device. The TV must be switched on for transmission.

A napped strip is provided to help to lay the cable. The strip is self-adhesive; pull off the backing foil first. Stick the strip to the shelf or cabinet and press the cable into the naps. You can cut up the strip into several sections with a knife.

Point the infrared remote control at the TV to operate the concealed VCR.

OK

confirm with OK.

Now you will see the playback from the connected AV unit.

22

31963_021_RC3_GB 22 14.01.2005, 10:40 Uhr