Toshiba RAS-B10SKVP-E Remote Controller and Its Fuctions, Parts Name of Remote Controller

9-5. Remote Controller and Its Fuctions

9-5-1. Parts Name of Remote Controller

1 Infrared signal transmitter

Transmits signals to the indoor unit.

2 button

Push the button to start operation. (A receiving beep is heard.)

Push the button again to stop operation. (A receiving beep is heard.)

If no receiving sound is heard from the indoor unit, push the button again.

3Mode select button (MODE)

Push this button to select a mode. Each time you push the button, the modes cycle in order from A:

Auto changeover control, : COOL, : DRY, : HEAT and back to A. (A receiving beep is heard.)

4Temperature button ( TEMP )

... The temperature setting is raised to 30°C.

... The temperature setting is lowered to 17°C. (A receiving beep is heard.)

5Fan speed button (FAN)

Push this button to select the fan speed.

When you select AUTO, the fan speed is automati- cally adjusted according to the room temperature. You can also manually select the desired fan speed

from five available settings. (LOW , LOW+			,
MED	, MED+	, HIGH	)
(A receiving beep is heard.)

6 Auto louver button (SWING)

Push this button to swing the louver. (A receiving beep is heard.)

Push the button again to stop the louver from swinging. (A receiving beep is heard.)

7 Set louver button (FIX)

Push this button to adjust the air flow direction. (A receiving beep is heard.)

8 ON timer button (ON)

Use this button to change the clock and ON timer times.

To move up the time, push of the ON ON button.

To move down the time, push of the ON ON button.

9 OFF timer button (OFF)

Use this button to change the OFF timer times.

To move up the time, push of the OFF OFF button.

To move down the time, push of the OFF OFF button.

10 Reserve button (SET)

Push this button to store the time settings. (A receiving beep is heard.)

11 Cancel button (CLR)

Push this button to cancel the ON timer and OFF timer. (A receiving beep is heard.)

12 High power button (Hi POWER)

Push this button to start high power operation.

13 Memory button (MEMO)

Push this button to ready for storing the settings.

Hold down the button for 3 seconds or more to store the setting indicated on the remote controller and until the mark is displayed.

14 Automatic operation button (AUTO)

Push this button to operate the air conditioner automatically. (A receiving beep is heard.)

15 SLEEP MODE button

Push this button to start sleep mode.

16 MY COMFORT button

Push this button to operate the air conditioner according to the settings stored using the MEMO button.

17 PURE button (PURE)

Push this button to start the electrical air purifying operation.

Push the button again to stop operation.

18 Off timer button (OFF)

Push this button to start the OFF timer operation.

You can select the OFF timer time from among four settings (1, 3, 5 or 9 hours).

19 8°C operation button (8°C) (-ND model only)

Push this button to start the 8°C set temperature heating operation.

	1
17	14
4	16
3
2	15
12
	13
7
	5
6	18
11	10
8	19
	9

– 52 –