Toshiba RAS-B10SKVP-E RAS-10SAVP-E, RAS-13SAVP-E, RAS-16SAVP-E, Corresponding, Original, model

14. SET UP OF SERVICE P.C. BOARD

Before replacing the P.C. board, set up the P.C. board according to the following table.

When repaired P.C. board should be electric discharge of capacitor. (C12, C13, C14)

Caution

APPLICATION MODELS :

RAS-10SAVP-E, RAS-13SAVP-E, RAS-16SAVP-E

RAS-10SAVP-ND, RAS-13SAVP-ND, RAS-16SAVP-ND

JUMPER SET UP :

As shown in the following table, cut jumper lead wire (J800, J801, J802, J806) according to each model.

Corresponding	ORIGINAL	RAS-	RAS-	RAS-	RAS-	RAS-	RAS-
model		10SAVP-E	13SAVP-E	16SAVP-E	10SAVP-ND	13SAVP-ND	16SAVP-ND
Jumper lead wire	Close	Close	Close	Open	Open	Close	Close
J800	(Original)	(Original)	(Original)	(Cut)	(Cut)	(Original)	(Original)
Jumper lead wire	Close	Close	Open	Close	Open	Close	Open
J801	(Original)	(Original)	(Cut)	(Original)	(Cut)	(Original)	(Cut)
Jumper lead wire	Close	Close	Close	Close	Close	Open	Close
J802	(Original)	(Original)	(Original)	(Original)	(Original)	(Cut)	(Original)
Jumper lead wire	Close	Close	Close	Close	Close	Close	Close
J806	(Original)	(Original)	(Original)	(Original)	(Original)	(Original)	(Original)

LOCATION OF JUMPER LEAD WIRE :

J800, J801, J802

IC800

J806

		L01
MCC-5009		Capacitor
C12	C13	C14

– 118 –