Toshiba RAS-B13SKVP-E, RAS-B10SKVP-E, RAS-10SAVP-E service manual 99

No. Part name Procedure Remarks

‚Front cabinet 1. Detachment

1) Perform step 1 in •.

2) Remove the fixing screws (ST1TØ4 ×

8L 2 pcs.) used to secure the front cabinet and inverter cover, the screws (ST1TØ4 × 8L 3 pcs.) used to secure the front cabinet at the bottom, and the fixing screws (ST1TØ4 × 8L 2 pcs.) used to secure the motor base.

• The front cabinet is fitted into the side cabinet (left) at the front left side so pull up the top of the front cabinet to remove it.

Front cabinet

2.Attachment

1)Insert the claw on the front left side into the side cabinet (left).

2) Hook the bottom part of the front right	Claw
side onto the concave section of the
bottom plate. Insert the claw of the side
cabinet (right) into the square hole in
the front cabinet.
3) Return the screws that were removed	Square hole
above to their original positions, and
attach them.the main unit, and attach it
pushing upward.

Concave section

– 99 –