Toshiba RAS-B13SKVP-E, RAS-B10SKVP-E, RAS-10SAVP-E service manual

No.	Part name	Procedures	Remarks
„	Horizontal louver	1) Remove shaft of the horizontal louver
		from the back body.
		(First remove the left shaft, and then
		remove other shafts while sliding the
		horizontal louver leftward.)
			Slide the horizontal
			louver leftward

… Evaporator	1)	Follow to the procedure in the item ƒ.
(Heat exchanger)	2)	Remove the pipe holder from the rear side of the main unit.
	3)	Remove two fixing screws at the left side of the end plate of the heat
		exchanger.

4)Remove the heat exchanger fixing holder by removing the two fixing screws used to secure it.

5)Remove right side of the end plate from two fixing ribs while sliding slightly the heat exchanger rightward.

Hangeg part

– 93 –