Toshiba RAS-10SAVP-E, RAS-B13SKVP-E, RAS-B10SKVP-E service manual 53, Display

9-5-2. Name and Functions of Indications on Remote Controller

[Display]

All indications, except for the clock time indicator, are displayed by pushing the button.

1 Transmission mark 6 TIMER and clock time indicator

This transmission mark indicates when the remote controller transmits signals to the indoor unit.

2 Mode indicator

Indicates the current operation mode.

(AUTO : Automatic control, A : Auto changeover

control, : Cool, : Dry, : Heat)

3 Temperature indicator

Indicates the temperature setting. (17°C to 30°C)

4 PURE indicator

Shows that the electrical air purifying operation is in progress.

5 FAN speed indicator

Indicates the selected fan speed.

AUTO or five fan speed levels
(LOW , LOW+	, MED	, MED+	,
HIGH	) can be shown.

Indicates AUTO when the operating mode is either AUTO or : Dry.

The time setting for timer operation or the clock time is indicated.

The current time is always indicated except during TIMER operation.

7 Hi POWER indicator

Indicates when the Hi POWER operation starts.

Push the Hi POWER button to start and push it again to stop the operation.

8 (MEMORY) indicator

Flashes for 3 seconds when the MEMO button is pushed during operation.

The mark is shown when holding down the button for 3 seconds or more while the mark is flashing.

Push another button to turn off the mark.

9SLEEP MODE indicator

Indicates when the SLEEP MODE is in activated.

Push the SLEEP MODE button to start and push it again to stop operation.

10A, B change indicator remote controller

When the remote controller switching function is set, “B” appears in the remote controller display. (When the remote controller setting is “A”, there is no indication at this position.)

1	2	10
3	4	8

O

9	7	5	6	•	In the illustration, all indications are shown for
					purposes of explanation.

During operation, only the relevant indicators are shown on the remote controller.

– 53 –