Toshiba RAS-B13SKVP-E Item, Operation flow and applicable data, etc, Description, Purpose

Item	Operation flow and applicable data, etc.	Description
18. Set temp.	<Indoor control P.C. board (At shipment)>	1. Purpose
correction		When the difference between the set
		temp. of the remote controller and the
		room temp. is wide due to the installation
		condition, etc, the set temp. is corrected.
		(HEAT operation only)
		2. Description
		The set temp. received from the remote
		controller is corrected. The correct value
		from –2°C to +4°C is changed by the
		jumper wire on P.C. board of the indoor
		microcomputer.

Jumper wire

J801

J802

J803

J804

<In HEAT operation>

Jumper wire setup		HEAT
J801	J802	shift value

×	×	–2
×	¡	+4
¡	×	+2	← At shipment
¡	¡	0

¡: With Jumper wire

×: Cut Jumper wire

<In 8°C HEAT operation> (–ND model only)

Jumper wire setup		HEAT
J803	J804	shift value

×	×	–2
×	¡	+4
¡	×	+2
¡	¡	0	← At shipment

¡: With Jumper wire

×: Cut Jumper wire

– 45 –