Toshiba RAS-B10SKVP-E, RAS-B13SKVP-E, RAS-10SAVP-E service manual 103

No.	Part name	Procedure	Remarks
‡	Compressor 1) Perform work of item 1 of • and ‚, ƒ, „, ….
	2)	Extract refrigerant gas.
	3)	Remove the partition board.
		(ST1TØ4 × 8L 3 pcs.)
	4)	Remove the sound-insulation material.
	5)	Remove terminal cover of the compressor, and
		disconnect lead wire of the compressor from the
		terminal.
	6)	Remove pipe connected to the compressor with
		a burner.	Partition board
		• Take care to keep the 4-way valve away from
			Valve fixing plate
		naked flames. (Otherwise, it may malfunction.)
	7)	Remove the fixing screw of the bottom plate	Compressor
		and heat exchanger. (ST1TØ4 × 8L 1 pc.)
	8)	Remove the fixing screw of the bottom plate
		and valve fixing plate. (ST1TØ4 × 8L 1 pc.)
	9)	Pull upward the refrigeration cycle.

10) Remove BOLT (3 pcs.) fixing the compressor to the bottom plate.

*Precautions when assembling the compressor. Tighten the compressor bolts using a tighten- ing torque of 4.9 N•m.

ˆ

Reactor

1)Perform work of item 1 of ‚, and ƒ.

2)Remove screws fixing the reactor. (ST1TØ4 × 8L 4 pcs.)

Reactor

– 103 –