Toshiba RAS-B13SKVP-E Item, Operation flow and applicable data, etc, Description, Purpose

	Item			Operation flow and applicable data, etc.			Description
15. Clean operation						1. Purpose
							The clean operation is to minimize the
							growth of mold, bacteria etc. by running
							the fan and drying so as to keep the
		Unit now performing cooling or dry operation					inside of the air conditioner clean.
							Clean operation
							When the cooling or dry operation shuts
							down, the unit automatically starts the
				Push “STOP” button
							clean operation which is then performed
							for the specified period based on duration
							of the operation which was performed
							prior to the shutdown, after which the
	Only S.CLEAN indicator lights, and clean operation starts						clean operation stops.
							(The clean operation is not performed
							after a heating operation.)
						2. Operation
				Time set now elapses
							1) When the stop signal from the remote
							controller is received, the S.CLEAN
							indicator (green) on the main body
							lights, and the clean operation starts.
				Operation stops			(Neither the OPERATION indicator nor
							the TIMER indicator light.)
							2) The period of the clean operation is
							determined by the duration of the
							operation performed prior to the
			• During clean operations: The louver opens				reception of the stop code.
				slightly. The indoor fan operates continuously at			3) After the clean operation has been
				a speed of 260 rpm.
							performed for the specified period, the
				Clean operation times			unit stops operating.
				Operation mode	Operation time		Clean operation time
					Up to 10 minutes		No clean operation
				Cooling: Auto (cooling) Dry			performed (0 minutes)
					10 minutes or longer		4 hours
				Heating: Auto (heating)
				Auto (fan only)	No clean operation performed
				Shutdown

•To stop an ongoing clean operation at any time

Push the start/stop button on the remote controller twice during the clean operation. (After pushing the button for the first time, push it for the second time without delay (within 10 minutes).)

– 42 –