10-5. Test Operation

10-5-1. Gas Leak Test

Check the flare nut connections for gas leaks with a gas leak detector and/or soapy water.

10-5-4. If the air conditioner operates incorrectly

• If two indoor units are installed in the same room

or adjoining rooms, when the user tries to operate

only one unit, both units may receive the same

remote controller signal and operate. This can be

Check places for

Valve cover

prevented by changing one of the indoor units and

flare nut connections (indoor unit)

Electric parts

Check places for outdoor unit

Fig. 10-5-1

10-5-2. Test Operation

To test the system, push and hold RESET button for 10 sec. (There will be one short beep.)

RESET

FILTER TIMER PURE OPERATION

RESET button

Fig. 10-5-2

remote controllers to setting “B”

(The default setting for both units is “A”).

• If the indoor unit and remote controller settings

are different, the remote controller signal is not

accepted.

1. Setting the remote controller

 

1) Slide open the remote controller cover and

 

remove the batteries.

 

2) Cut the jumper wire inside the battery

 

compartment using nippers.

 

• The jumper wire should not remain in

 

contact after being cut. Also, be careful

 

not to let plastic scraps, jumper wire

 

cuttings or other debris enter the inside of

 

the remote controller.

 

3) Insert the batteries. “B” appears in the

 

remote controller display.

2.

Setting the unit

 

Push the RESET button to start automatic

 

operation.

3.

Push the

 

button of the remote controller

 

 

 

that was set in step 1 to stop the air

 

conditioner.

 

(This operation will change the setting to “B”.)

4. Check that the remote controller operates the

 

indoor unit.

10-5-3. Auto Restart Setting

This product is designed so that, after a power failure, it can restart automatically in the same

HiPOWER SLEEP MODE MEMO

1.3.5.9H

SWING FIX FAN OFF

CLRSET

Cutting direction

Jumper wire

CLOCK

ON OFF

operating mode as before the power failure.

Information

The product was shipped with Auto Restart function in the OFF position.

RESET

CHECK

When switching between settings A and B , always switch the indoor unit board and the remote controller as a pair. (Otherwise, the indoor unit will not accept the remote controller s signals.)

Turn it ON as required.

How to Set the Auto Restart

Push and hold the RESET button for about 3 seconds. After 3 seconds, three short electric beeps will be heard to inform you that the Auto Restart has been selected.

To cancel the Auto Restart, follow the steps described in the section Auto Restart Function on Owner’s Manual.

Fig. 10-5-3

RESET

FILTER TIMER PURE OPERATION

RESET button

Fig. 10-5-4

– 67 –

Page 67
Image 67
Toshiba RAS-B10SKVP-E, RAS-B13SKVP-E, RAS-10SAVP-E service manual Test Operation

RAS-10SAVP-E, RAS-B10SKVP-E, RAS-B13SKVP-E specifications

Toshiba has established itself as a leader in the HVAC market, known for its innovative technologies and reliable performance. Among its range of air conditioning units, the Toshiba RAS-B10SKVP-E, RAS-10SAVP-E, and RAS-B13SKVP-E models stand out for their efficiency and advanced features.

The Toshiba RAS-B10SKVP-E is designed for optimal cooling and heating efficiency, making it an ideal choice for small to medium-sized rooms. One of its main features is the Super Hi-M-PAM inverter technology, which enhances energy savings by continuously adjusting the compressor speed to match the cooling demand. This results in lower energy consumption while maintaining a stable temperature. Additionally, the unit boasts a 4-in-1 operation mode that allows users to select cooling, heating, dehumidification, or ventilating modes, ensuring maximum comfort at all times.

Similarly, the RAS-10SAVP-E model incorporates advanced features such as an eco-friendly refrigerant, R32, which has a lower Global Warming Potential (GWP) compared to traditional refrigerants. This model is equipped with a high-efficiency filter that captures dust and allergens, ensuring cleaner air quality. The sleek design allows for easy integration into various interior styles, while its quiet operation makes it a preferred choice for residential environments.

The RAS-B13SKVP-E model takes performance to the next level with a robust cooling capacity, designed for larger spaces. This model utilizes Toshiba's unique DC Hybrid Inverter technology, which not only enhances cooling efficiency but also facilitates faster temperature control. A notable characteristic of this unit is its wide-angle air distribution system, which allows for even airflow throughout the room, enhancing comfort.

In addition to these features, all three models are equipped with smart controls that enable users to operate their air conditioning systems remotely via mobile devices. This connectivity adds convenience and ensures that users can manage their indoor climate at their fingertips. They also come with user-friendly interfaces and programmable timers, allowing for personalized comfort settings.

In conclusion, the Toshiba RAS-B10SKVP-E, RAS-10SAVP-E, and RAS-B13SKVP-E air conditioning units combine energy efficiency, innovative technology, and user-friendly features to deliver exceptional indoor comfort. With their advanced technologies, these models are ideal choices for anyone seeking reliable and effective climate control solutions.