Toshiba RAS-B10SKVP-E, RAS-B13SKVP-E, RAS-10SAVP-E service manual 91

No.	Part name		Procedures	Remarks
‚	High voltage	1)	Follow to the procedure in the item •.
	generator	2)	Disconnect the connectors of the
			high-voltage generator, and disconnect the
			four leads from where they are fitted into
			the other components.	Screw
		3)	Remove the fixing screw which secures the
			high voltage generator, and remove the	High voltage
			high voltage generator from the evaporator.
				generator

Connector

Screw

<How to assemble the high voltage generator>

1)Put the high voltage generator on the evaporator and then fix it with two screws.

2)Pass the leads of the high voltage

generator through the area designated and	Claw
insert them into its connectors.
	Claw

– 91 –