Toshiba RAS-10SAVP-E, RAS-B13SKVP-E How To Diagnose The Trouble, Caution: High Voltagen

11. HOW TO DIAGNOSE THE TROUBLE

The pulse motor circuits are mounted to both indoor and outdoor units.

Therefore, diagnose troubles according to the trouble diagnosis procedure as described below.

(Refer to the check points in servicing written on the wiring diagrams attached to the indoor/outdoor units.)

Table 11-1

No.	Troubleshooting Procedure	Page
1	First Confirmation	70
2	Primary Judgment	71
3	Judgment by Flashing LED of Indoor Unit	71
4	Self-Diagnosis by Remote Controller	72
5	Judgment of Trouble by Every Symptom	75

No.	Troubleshooting Procedure	Page
6	How to Check Simply the Main Parts	80
7	Troubleshooting	81
8	How to Diagnose Trouble in Outdoor Unit	82
9	How to Check Simply the Main Parts	83
10	How to Simply Judge Whether Outdoor	88
	Fan Motor is Good or Bad

KPrecautions when handling the new inverter (3DV Inverter)

CAUTION: HIGH VOLTAGEN

The high voltage circuit is incorporated.

Be careful to do the check service, as the electric shock may be caused in case of touching parts on the P.C. board by hand.

The new inverter (3DV inverter) will be incorporated starting with this unit.

(3DV: 3-shunt Discrete Vector control)

KThe control circuitry has an uninsulated construction.

		G-Tr	Compressor
		FET	Fan motor
	Photocoupler
		(6IN1)
Separated potential	MCU
			Hall device
			Photocoupler

Shared potential

JAVP-E series (insulated type)

			IGBT × 6	Compressor
				Fan motor
	Driver	Amplifier	FET × 6
MCU	Driver
	Amplifier

SAVP-E, SAVP-ND, GAVP-E, EAVP-E series (uninsulated type)

Fig. 11-1

– 68 –