Toshiba RAS-10SAVP-E, RAS-B13SKVP-E, RAS-B10SKVP-E service manual 95

No.	Part name		Procedures	Remarks
‡	Fan motor	1)	Follow to the procedure in the item ƒ.
		2)	Loosen the set screw of the cross flow fan.
		3)	Remove two fixing screws of the motor
			band (Right), and then remove the motor
			band (Right).
		4)	Pull the fan motor outward.
			In assembling work, install the fan motor
			as follows.
			• When assembling the fan motor, the fan
			motor must be installed in such a way
			that the fan motor leads will be taken out
			is positioned at the bottom front.
			• After assembling the two hooking claws
			of the motor band (right) into the main
			body, position the fan motor, insert it, and
			then secure the motor band (right) using
			the two fixing screws.

Secure using the fixing screw

Screw

Motor band (Right)

Screw

Secure using the fixing screw

Fan motor leads

ˆ Cross flow fan 1)	Follow to the procedure in the item †.
2)	Remove the heat exchanger fixing holder
	by removing the two fixing screws used to
	secure it.
		Raise the
3)	Loosen the set screw of the cross flow fan.	left side

4)Lift the left side of the heat exchanger, and pull out the cross flow fan.

Pull out here

– 95 –