Toshiba RAS-10SAVP-E Optional Installation Parts, Accessory and Installation Parts, <Others>

10-2. Optional Parts, Accessories and Tools

10-2-1. Optional Installation Parts

Part Code		Parts name		Q’ty
		Refrigerant piping
	Indoor unit name	Liquid side (Outer diameter)	Gas side (Outer diameter)	.
Y				1 ea.
	RAS-B10SKVP-E, B13SKVP-E	6.35 mm	9.52 mm
	RAS-10SKVP-ND, 13SKVP-ND
	RAS-B16SKVP-E, 16SKVP-ND	6.35 mm	12.7 mm
Z	Shield pipe (for extension drain hose) (polyethylene foam, 6 mm thick)			1

Attachment bolt arrangement of outdoor unit

•Secure the outdoor unit with the attachment bolts and nuts if the unit is likely to be exposed to a strong wind.

•Use Ø8 mm or Ø10 mm anchor bolts and nuts.

If it is necessary to drain the defrost water, attach drain nipple to the base plate of the outdoor unit before installing it.

Elongated drain hole

( ￿ )

Suction side

Drain hole

				Diffuser	( ￿ )
10-2-2. Accessory and Installation Parts
Part No.	Part name (Q’ty)	Part No.	Part name (Q’ty)	Part No.	Part name (Q’ty)
•		„		‡	Remote controller
					holder mounting screw
	Installation plate × 1		Remote controller holder × 1		Ø3.1 × 16L × 2
‚		…		ˆ
	Wireless remote controller × 1		Plasma pure filter × 1		Drain nipple* × 1
ƒ		†		‰
	Battery × 2		Mounting screw Ø4 × 25L × 6		Water-proof rubber cap* × 2

<Others>

Name

Owner’s manual

Installation manual

Important information

and warning*

B/W strips*

(Energy efficiency labels)

This model is not equipped with	Parts marked with asterisk (*) are
an extension drain hose.	packaged with the outdoor unit.

Option:

For the extension drain hose, use the optionally available RB-821SW or a commercially available one.

•Indoor units connectable with a multi-system outdoor unit (Other indoor units are unavailable.)

RAS-B10SKVP-E, RAS-B13SKVP-E, RAS-B16SKVP-E

•When using a multi-system outdoor unit, refer to the installation manual provided with the model concerned.

– 56 –