Toshiba RAS-10SAVP-E, RAS-B13SKVP-E, RAS-B10SKVP-E service manual Sleep, Mode, Cooling operation

Item	Operation flow and applicable data, etc.	Description
10. SLEEP	When pushing [SLEEP MODE] button on the remote controller, a
MODE	quiet and mild operation is performed by reducing the fan speed
operation	and the compressor speed.

<Cooling operation>

This function operates the air conditioner with the difference between the set and the room temperature as shown in the following figure.

The time correction is performed for 8 minutes each.

		Compressor speed			Fan speed	Time	<Cooling operation>
	Zone						1) The indoor fan speed is con-
			(rps)		(rpm)	correction
		10	13	16			trolled between L and SUL.
TA
	12	31	31	31	L (W6)		The compressor speed in control
[˚C]
	11	27	27	27			as shown in the left figure.
+4.0
	10	24	24	24
+3.5							2) The set temperature increased
	9	20	20	20		+ 1 zone
+3.0					L– (W5)		0.5°C per hour up to 2°C starting
	8	17	17	17
+2.5							from the set temperature when
	7	14	14	14
+2.0							SLEEP MODE has been
	6	11	11	11
+1.5							received.
	5				UL (W4)
+1.0
	4					± 0
+0.5
	3
TSC
	2
–0.5
	1					–1 zone
–1.0					SUL (W3)
						(min 1)
–3.0	0	OFF	OFF	OFF

		<Heating operation>			<Heating operation>
		30 minutes	ÆTime	Compressor	1) The indoor fan speed is con-
					trolled within (W7) as maximum
				speed	value.
	0			0 rps	2) Setting the compressor speed to
		A
	–0.5				Max. 52 rps, the temperature
temp.)	–1.0	B		16 rps	zone in which the operation can
	–1.5		A		be performed with Max. 16 rps is
	–2.0			A zone	gradually widened after 30
Set–	–2.5				minutes passed when starting
	–4.0				SLEEP MODE operation.
	–3.0
temp.	–5.0				3) The louver position is set
					horizontally (Standard cooling
	–6.0
					position) when the room tem-
(Room	–7.0
				16 to 52 rps	temperature or when 25 minutes
	–9.0
	–8.0	C	B	B zone	perature comes close to the set
	–10.0				passed after starting SLEEP
					MODE operation.
	–11.0
			C	C zone
				52 rps

– 38 –