Toshiba RAS-10SAVP-E, RAS-B13SKVP-E, RAS-B10SKVP-E service manual 104

No.	Part name	Procedure	Remarks
‰	Electronic	1. Detachment
	expansion	1) Perform step 1 in ‚, all the steps in ƒ and 1
	valve coil
		in ….	Coil
		2) Remove the coil by pulling it up from the
			anti-turn
		electronic control valve body.	lock
		2. Attachment	Coil anti-turn
		1) When assembling the coil into the valve body,
			lock position
		ensure that the coil anti-turn lock is installed
		properly in the pipe.
		<Handling precaution>	Coil inserting
		When handling the parts, do not pull the leads.	position
		When removing the coil from the valve body, use
		your hand to secure the body in order to prevent
		the pipe from being bent out of shape.

Š Fan guard	1. Detachment
	1)	Perform work of item 1 of ‚.
	2)	Remove the front cabinet, and put it down so	Minus screwdriver
		that fan guard side directs downward.	Hooking claw

Perform work on a corrugated cardboard, cloth, etc. to prevent flaw to the product.

3)Remove the hooking claws by pushing minus screwdriver according to the arrow mark in the right figure, and remove the fan guard.

2.Attachment

1)Insert claws of the fan guard in the holes of the front cabinet. Push the hooking claws (9 positions) by hands and fix the claws.

All the attaching works have completed. Check that all the hooking claws are fixed to the specified positions.

– 104 –