Assembly and Use
of Hand Blender Attachment
| 1 | Ensure the motor base is unplugged. Attach |
|
| hand blender rod to motor base by lining up |
|
| the two separate parts. Turn clockwise to lock |
|
| in place. (see figure 1) |
| 2 | Place one of the small metal attachments in the |
|
| shaft of the mixing rod. Make sure that the pin |
|
| located on the shaft fits into the slot of the |
|
| attachment. Press down until attachment locks |
figure 1 |
| in place. |
| Caution: Blades are sharp. Handle with care. | |
|
| |
|
| |
| Place food in suitable container for mixing | |
| 3 | |
|
| (beaker, bowl, pan). For best results, solid foods |
|
| should be no larger than 1/4" or 1/2" cubes. |
| 4 | Plug into |
| 5 | Place the hand blender attachment into your |
|
| ingredients. Turn the speed selector to LO first. |
|
| Press the ON/OFF switch to begin blending; then |
figure 2 |
| gradually increase speed, as needed. (see figure |
| 2) Slowly move the blade up, down and sideways | |
|
| |
|
| |
|
| through the food . Note: Never lift the hand |
|
| |
|
| blender attachment out of your ingredients while |
|
| the unit is running. |
Using the Attachment Blades
To change the metal attachment blade, remove the attachment already inserted on the shaft of the mixing rod with the tool provided. Use the side of the tool with the
Caution: Blades are sharp. Handle with care.
Suggested Uses
To change the metal attachment blade, remove the attachment already inserted on the shaft of the mixing rod with the tool provided. Use the side of the tool with the
Caution: Blades are sharp. Handle with care.
Attachment | Functions | Speed |
Aerator disc | Beat cream, whip egg whites, | Minimum |
| puddings, sauces, frostings and other |
|
| airy, foamy mixtures. When using, move |
|
| blending rod up and down to draw air |
|
| in. Use a tall, narrow container for best |
|
| results when foaming milk, making |
|
| cream and whipping egg whites. |
|
6 | Do not operate the motor continuously for more | |
|
| than one minute when using hand blender |
|
| attachment. Allow it to cool off for 3 minutes |
|
| before next use. |
7 | When you are finished, simply release the | |
figure 3 |
| ON/OFF switch, unplug the motor base, and |
then unscrew the hand blender rod. | ||
8 | To remove blades from the blender rod, use your | |
Blending disc
Grinding blade
Mix and stir shakes, drinks, omelet batters, sauces and emulsions. Use for pancake batter, gravies and dressings.
Cut, chop, and crush raw or cooked meat and hard
Medium to Maximum
Maximum
blade removal tool as shown in figure 3. Slide |
the opening of the tool underneath the blade |
and press down. |
Multipurpose blade | Chop, crush, and mash | Medium to |
| fruit for baby food, soups and sauces. | Maximum |
| Use to crush ice (add water to cubes |
|
| before crushing.) |
|
7 | 8 |
