Wolfgang Puck BIBC1010 manual Assembly and Use of Food Chopper Attachment, Helpful Hints

Models: BIBC1010

1 14
Download 14 pages 52.29 Kb
Page 6
Image 6
Assembly and Use

Assembly and Use

of Food Chopper Attachment

figure 1

1

Ensure the motor base is unplugged.

 

 

 

2

Assemble chopper bowl by first placing the

 

 

chopping blade onto the blade shaft in the

 

 

chopper bowl. (see figure 1) Then place food in

 

 

bowl. For best results, solid foods should be no

 

 

larger than 1/4" or 1/2" cubes.

 

3

Secure the bowl cover firmly onto the bowl by

 

 

turning clockwise. (see figure 2)

 

4

Attach motor base to top of bowl cover by

 

 

 

turning clockwise.

figure 2

 

 

 

 

5

Plug into 120-volt 60 Hz AC only outlet.

 

6

Attach the motor base to the chopping bowl

 

 

cover (see figure 3). Hold the motor base with

 

 

one hand and the bowl with the other. Set speed

 

 

control to MAX. Press the ON/OFF switch to

 

 

begin chopping. Use a pulse action when

 

 

chopping by pressing and releasing ON/OFF

 

 

switch.

 

7

Do not operate the motor continuously for more

 

figure 3

 

than 15 seconds when using chopper

 

 

 

 

attachment. Allow it to cool off for 3 minutes

 

 

before next use.

 

8

When you are finished, simply release the

 

 

ON/OFF switch, unplug the motor base, and

 

 

then unscrew the chopper bowl.

 

 

 

Helpful Hints

The hand blender can be used in hot liquids. Always use care when using in hot liquids. To avoid splashing when using the hand blender in a saucepan, insert the hand blender into the pan first, and then press the ON/OFF switch for operation.

To puree foods, a certain amount of liquid is needed. Add cooking liquid, broth, juice, milk, or cream, until desired consistency is reached.

For thorough blending, move blade up and down in mixture until smooth.

You will achieve better mixing results if you use deep, tall containers.

For easy cleanup, unplug blender and rinse under running water immediately after using.

Place liquid ingredients into the beaker first unless recipe specifically states otherwise.

Before turning the appliance on, immerse the hand blender attachment into the prepared ingredients, thus ensuring they will not spill over.

For greater efficiency, move the appliance in small outward spiraling circles while mixing, without touching the bottom of the beaker with the hand blender attachment.

The hand blender attachment cannot blend hard or fibrous ingredients unless they are in less than 1/2" pieces, soft ones into 1/2 - 1" pieces.

Some foods require a small amount of liquid to allow them to move freely around the blades. Soft or wetter foods require less liquid, while dry ingre- dients require more liquid. Add the liquid a little at a time until the mix gains the required consistency.

When using the hand blender, ensure the blades are covered to avoid splashing.

9

10

Page 6
Image 6
Wolfgang Puck BIBC1010 manual Assembly and Use of Food Chopper Attachment, Helpful Hints