Version

Description

9.7(0.0)

Added support for VRF. Removed the acl-access-list

 

parameter. Modified the max value of S, G entry second

 

range from 86400 to 65535. Introduced on the S6000-ON.

9.5(0.0)

Introduced on the Z9500.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

8.1.1.0Introduced on the E-Series ExaScale.

7.8.1.0Introduced on the C-Series for the port-channels and the S- Series.

7.7.1.1Introduced

Usage

This command configures an expiration timer for all S.G entries, unless they are

Information

assigned to an Extended ACL.

 

Even though the FHR nodes act as RPs, these nodes still send Register encap

 

messages to themselves and expect to receive a Register stop message (for

 

Anycast RP support). As a result, if the DLT timer expires, SG is not deleted until the

 

register state is deleted in the node. This register state expires 210 seconds after

 

the last Null register is received.

ip pim ssm-range

Specify the SSM group range using an access list.

Syntax

ip pim [vrf vrf-name] ssm-range {access_list_name}

Parameters

vrf vrf-name

(OPTIONAL) Enter the keyword vrf followed by the name of

 

 

 

the VRF to specify the SSM group range for that VRF.

 

 

NOTE: Applies to specific VRF if input is provided, else

 

 

applies to Default VRF.

 

access_list_na

Enter the name of the access list.

 

me

 

Defaults

Default SSM range is 232/8 and ff3x/32

Command

CONFIGURATION

 

Modes

 

 

PIM-Sparse Mode (PIM-SM)

1201

Page 1201
Image 1201
Dell 9.7(0.0) manual Ip pim ssm-range, Ip pim vrf vrf-name ssm-range accesslistname, Accesslistna