Dell 9.7(0.0) manual Distance bgp, Parameters Command Modes Command History

Parameters

Command Modes

Command History

vrf vrf-name	Enter the keyword vrf followed by the name of the VRF to
	view information on dampened routes corresponding to that
	VRF.
ipv4 multicast	(OPTIONAL) Enter the keyword ipv4 followed by the
	keyword multicast to view dampened-route information
	related only to ipv4 multicast routes.
ipv4 unicast	(OPTIONAL) Enter the keyword ipv4 followed by the
	keyword multicast to view dampened-route information
	related only to ipv4 unicast routes.
ipv6 unicast	(OPTIONAL) Enter the keyword ipv4 followed by the
	keyword unicast to view dampened-route information
	related only to ipv6 unicast routes.
EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

b

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.8.1.0Introduced on the S-Series.

7.7.1.0Introduced on the C-Series.

7.6.1.0Introduced IPv6 MGBP support for the E-Series.

distance bgp

Define an administrative distance for routes.

S6000

Syntaxdistance bgp external-distance internal-distance local-distance

To return to default values, use the no distance bgp command.

Border Gateway Protocol 455