Related

protocol spanning-tree pvst – enter SPANNING TREE mode on the switch.

Commands

 

protocol spanning-tree pvst

To enable PVST+ on a device, enter the PVST+ mode.

S6000

Syntax

protocol spanning-tree pvst

 

To disable PVST+, use the disable command.

Defaults

none

Command

CONFIGURATION

Modes

 

Command

This guide is platform-specific. For command information about other platforms,

History

refer to the relevant Dell Networking OS Command Line Reference Guide.

 

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0)

Introduced on the S6000-ON.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

8.3.1.0Introduced.

ExampleDell#conf

Dell(conf)#protocol spanning-tree pvst Dell(conf-pvst)#no disable Dell(conf-pvst)#vlan 2 bridge-priority 4096 Dell(conf-pvst)#vlan 3 bridge-priority 16384 Dell(conf-pvst)#

Dell(conf-pvst)#show config

!

protocol spanning-tree pvst no disable

vlan 2 bridge-priority 4096 vlan 3 bridge-priority 16384

Dell#

Per-VLAN Spanning Tree Plus (PVST+)

1231

Page 1231
Image 1231
Dell 9.7(0.0) manual Protocol spanning-tree pvst