Usage Information

Example

show ip rpf

The following describes the show ip mroute command shown in the following example.

Field

Description

(S, G)

Displays the forwarding entry in the multicast route table.

uptime

Displays the amount of time the entry has been in the

 

multicast forwarding table.

Incoming

Displays the reverse path forwarding (RPF) information

interface

towards the source for (S,G) entries and the RP for (*,G)

 

entries.

Outgoing

Lists the interfaces that meet one of the following:

interface list:

• a directly connected member of the Group

 

 

• statically configured member of the Group

 

• received a (*,G) or (S,G) Join message

Dell#show ip mroute

IP Multicast Routing Table

(*, 224.10.10.1), uptime 00:05:12

Incoming interface: TenGigabitEthernet 3/12 Outgoing interface list:

TenGigabitEthernet 3/13

(1.13.1.100, 224.10.10.1), uptime 00:04:03 Incoming interface: TenGigabitEthernet 3/4 Outgoing interface list:

TenGigabitEthernet 3/12

TenGigabitEthernet 3/13

(*, 224.20.20.1), uptime 00:05:12

Incoming interface: TenGigabitEthernet 3/12 Outgoing interface list:

TenGigabitEthernet 3/4

View reverse path forwarding.

S6000

Syntax

Command Modes

Command History

show ip rpf

•EXEC

•EXEC Privilege

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Multicast

1019

Page 1019
Image 1019
Dell 9.7(0.0) manual Show ip rpf, Outgoing, Interface list