Dell 9.7(0.0) manual Dellconf-mstp#show config, No disable Name CustomerSvc revision Msti 10 Vlan

Usage Information

Related Commands

Version	Description
pre-6.2.1.1	Introduced on the E-Series.

For two MSTP switches to be within the same MST region, the switches must share the same revision number.

msti — maps the VLAN(s) to an MST instance.

name — assigns the region name to the MST region.

show config

View the current configuration for the mode. Only non-default values are shown.

S6000

Syntax	show config
Command	MULTIPLE SPANNING TREE
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S6000-ON.
9.0.2.0	Introduced on the S6000.
8.3.19.0	Introduced on the S4820T.
8.3.11.1	Introduced on the Z9000.
8.3.7.0	Introduced on the S4810.
7.6.1.0	Introduced on the S-Series.
7.5.1.0	Introduced on the C-Series.
6.5.1.0	Introduced on the E-Series.

Example	Dell(conf-mstp)#show config
	!
	protocol spanning-tree mstp

no disable

name CustomerSvc revision 2

MSTI 10 VLAN 101-105

1004 Multiple Spanning Tree Protocol (MSTP)