Usage
Information The following describes the show mac-address-table command shown in the
following example.
Column Heading Description
VlanId Displays the VLAN ID number.
Mac Address Displays the MAC address in nn:nn:nn:nn:nn:nn format.
Type Lists whether the MAC address was manually configured
(Static), learned (Dynamic), or associated with a specific port
(Sticky). An (N) indicates that the specified MAC address has
been learnt by a neighbor and is synced to the node.
Interface Displays the interface type and slot/port information. The
following abbreviations describe the interface types:
• gi — Gigabit Ethernet followed by a slot/port
• po — Port Channel followed by a number. Range for
Terascale is from 1 to 255. \
• te — 10–Gigabit Ethernet followed by a slot/port.
State Lists if the MAC address is in use (Active) or not in use
(Inactive).
The following describes the show mac-address-table count command shown
in the following example.
Line Beginning
With
Description
MAC Entries... Displays the number of MAC entries learned per VLAN.
Dynamic
Address...
Lists the number of dynamically learned MAC addresses.
Static Address... Lists the number of user-defined MAC addresses.
Total MAC... Lists the total number of MAC addresses the switch uses.
Example
(Count) Dell# show mac-address-table count
MAC Entries for all vlans :
Dynamic Address Count : 110
Static Address (User-defined) Count : 0
Sticky Address Count : 0
Total Synced Mac from Peer(N): 100
Total MAC Addresses in Use: 110
Dell#
Related
Commands
show mac-address-table aging-time — displays MAC aging time.
Layer 2 929