Defaults

Command Modes

Command History

Usage Information

[version {1 2}] (OPTIONAL) Enter the keyword version then the SSH version 1 or 2 to specify only SSHv1 or SSHv2.

NOTE: If you enable FIPS mode, you can only select version 2.

•Default listening port is 22.

•Default cipher list is 3des-cbc,aes128-cbc,aes192-cbc,aes256-cbc,aes128- ctr,aes192-ctr,aes256-ctr.

•When FIPS is enabled, the default is hmac-sha1-96.

•When FIPS is not enabled, the default is hmac-md5,hmac-md5-96,hmac- sha1,hmac-sha1-96,hmac-sha2-256,hmac-sha2-256-96.

•When FIPS is enabled, the default is diffie-hellman-group14-sha1.

•When FIPS is not enabled, the default is diffie-hellman-group-exchange- sha1,diffie-hellman-group1-sha1,diffie-hellman-group14-sha1.

CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version

Description

9.7(0.0)

Introduced on the S6000–ON.

9.5(0.0)

Introduced the cipher, kex and mac options on the Z9000,

 

S6000, S4820T, S4810, and MXL.

9.0.2.0Introduced on the S6000.

8.3.19.0Introduced on the S4820T.

8.3.11.1Introduced on the Z9000.

8.3.7.0Introduced on the S4810.

7.6.1.0Introduced on the S-Series.

7.5.1.0Introduced on the C-Series.

pre-6.1.1.0

Introduced on the E-Series.

This command enables the SSH server and begins listening on a port. If a port is not specified, listening is on SSH default port 22.

NOTE: Starting with Dell Networking OS Release 9.2(0.0), SSH server is enabled by default.

1434

Security

Page 1434
Image 1434
Dell 9.7(0.0) manual Introduced the cipher, kex and mac options on the Z9000