UCAST 11 0 3
2 0 3
MCAST 4 0 0
0 0 3
If only two instances are available at the time the above show command is issued,
only two instances is displayed in the summary output.
---------------------------------------------------------------
------------------------------------------------
Q# TYPE Q# TOTAL BUFFERED CELLS
Instance 1 Instance 2
10S 20S
---------------------------------------------------------------
------------------------------------------------
UCAST 2 5 4
1
UCAST 3 2 0
UCAST 11 0 3
MCAST 4 0 0
Dell#show hardware stack-unit 0 buffer-stats-snapshot unit 0
resource port 5 prio-group all history summary
Stack-unit 0 unit 0 port 5 (interface te 0/4)
---------------------------------------------------------------
------------------------------------------------
PG# Instance 1 Instance 2 Instance 3
Instance 4 Instance 5
Shared Hdrm Shared Hdrm Shared Hdrm Shared Hdrm
Shared Hdrm [in CELLS]
---------------------------------------------------------------
------------------------------------------------
6 9 2 0 0 1
0 4 1 7
1
7 0 0 0 0 1
0 0 0 0 0
In the following example, the Headroom Cells field indicates the amount of shared
buffer area that is allocated to store packets that are received after the pause frame
is received or a priority-based flow control pause frame is enabled. When an
inbound interface halts the sending of traffic, it must have the buffer space to save
all of the packets currently in the buffer, and also all of the packets that were
received before the device stops the sending of packets. Headroom space is used
for high-priority traffic that needs to be queued and preserved above the input
queue limit, such as keepalives and hello messages.
You can use the following sample command output to obtain a consolidated,
whole-scale set of statistical counters of buffer resource utilization in the system
and identify the ports that you want. All resources will be cleared after their values
are displayed.
Dell#show hardware stack-unit 0 buffer-stats-snapshot unit 0
Data Center Bridging (DCB) 513