Dell 9.7(0.0) manual Ipv6 helper-address, Show ip dhcp snooping, Vrf

Usage	Use this command on the interfaces where the DHCP clients are connected to
Information	forward the packets from clients to DHCP server and vice-versa.
Example	Dell(conf-if-te-1/12)#ip helper-address vrf jay 10.0.0.2

ipv6 helper-address

Configures the ipv6 DHCP helper addresses without VRF.

Syntax [no] ipv6 helper-address ipv6-address

Parameters

Default

Command Modes

Command History

Usage Information

Example

To delete the ipv6 helper address, use the [no] ipv6 helper-addressipv6- address command.

ipv6-addressEnter the keywordipv6–addressthrough which the server address can be reached.

Disabled.

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version	Description
9.7(0.0)	Introduced on the S4810, S4820T, S6000, S6000–ON,
	Z9000, and Z9500.

Use this command on the interfaces where the DHCP clients are connected to forward the packets from clients to DHCP server and vice-versa.

Dell(conf-if-te-0/0)#ipv6 helper-address

X:X:X:X::X	IPv6 helper address
VRF	VRF name.
Global	Global address space

show ip dhcp snooping

Display the contents of the DHCP binding table or display the interfaces configured with IP Source Guard.

Syntaxshow ip dhcp snooping [binding source-address-validation [discard-counters [interface interface]]]

Parameters
binding	Display the binding table.

574 Dynamic Host Configuration Protocol (DHCP)