Dell 9.7(0.0) manual Dot1x tx-period, Parameters Defaults Command Modes Command History Seconds

Parameters

Defaults

Command Modes

Command History

seconds	Enter a time-out value in seconds. The range is from 1 to
	300, where 300 is implementation dependant. The default is
	30.

30seconds

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

9.0.0.0Introduced on the Z9000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

7.6.1.0Introduced on the C-Series and S-Series.

7.4.1.0Introduced on the E-Series.

dot1x tx-period

Configure the intervals at which EAPOL PDUs the Authenticator PAE transmits.

Syntax

Parameters

Defaults

Command Modes

Command History

dot1x tx-period seconds

To return to the default, use the no dot1x tx-periodcommand.

seconds	Enter the interval time, in seconds, that EAPOL PDUs are
	transmitted. The range is from 1 to 65535. The default is 30.

30seconds

INTERFACE

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

802.1X 175