Dell 9.7(0.0) manual Clear ipv6 dhcp snooping binding, Ip dhcp relay, Remote-id, Trust, Downstream

	The following example shows how to clear the discard counters on a port channel
	interface:
	Dell> clear ip dhcp snooping source-address-validation discard-
	counters interface portchannel 1
Related	show ip dhcp snooping — displays the contents of the DHCP binding table.
Commands

clear ipv6 dhcp snooping binding

Clear all the DHCPv6 snooping binding database entries.

Syntax	clear ipv6 dhcp snooping binding
Defaults	none
Command	EXEC Privilege
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command-Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.
	Version	Description
	9.7(0.0)	Introduced on the S4810, S4820T, S6000 and Z-Series.
Example	Dell# clear ipv6 dhcp snooping?
	binding	Clear the snooping binding database

ip dhcp relay

Enable Option 82.

Syntax

Parameters

Defaults

Command

Modes

Command

History

ip dhcp relay information-option [remote-id trust-downstream]

remote-id	Configure the system to enable the remote-id string in
	option-82.
trust-	Configure the system to trust Option 82 when it is received
downstream	from the previous-hop router.
Disabled
CONFIGURATION

This guide is platform-specific. For command information about other platforms, refer to the relevant Dell Networking OS Command Line Reference Guide.

562 Dynamic Host Configuration Protocol (DHCP)