Dell 9.7(0.0) manual Dot1x authentication Interface, Related

VersionDescription

9.0.0.0Introduced on the Z9000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

7.6.1.0Introduced on the C-Series and S-Series.

7.4.1.0Introduced on the E-Series TeraScale.

Related	dot1x authentication (Interface) — Enables dot1x on an interface.
Commands

dot1x authentication (Interface)

Enable dot1x on an interface. Enable dot1x both globally and at the interface level.

Syntax	dot1x authentication
	To disable dot1x on an interface, use the no dot1x authentication command.
Defaults	Disabled
Command	INTERFACE
Modes
Command	This guide is platform-specific. For command information about other platforms,
History	refer to the relevant Dell Networking OS Command Line Reference Guide.
	The following is a list of the Dell Networking OS version history for this command.

VersionDescription

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0Introduced on the S6000.

9.0.0.0Introduced on the Z9000.

8.3.19.0Introduced on the S4820T.

8.3.12.0Introduced on the S4810.

8.3.11.1Introduced on the Z9000.

7.6.1.0Introduced on the C-Series and S-Series.

7.4.1.0Introduced on the E-Series.

Related	dot1x authentication (Configuration) — Enables dot1x globally.
Commands

802.1X 165