Humax Comprehensive Guide to Serial Control Using RS-232C for LCD TVs

Models: L3040

1 65
Download 65 pages 32.79 Kb
Page 53
Image 53

Serial Control Using RS-232C

Serial Control Using RS-232C Cable (optional)

Use RS-232C cable when you control the LCD TV using the PC.

This function is called PC Remote Control and is the same as the physical Remote control.

It will provide you an additional convenience when you use the LCD TV connected with a PC. (The RS-232C cable is not included with the LCD TV. Separately sold RS-232C cable is required.) First, connect the RS-232C cable between the PC and the LCD TV RS-232C input port. Refer to the following method for using this function.

Installing Hyper terminal

From the Windows original disks.

On most Windows 95/98/2000 machines, Hyper- terminal should be installed without explicitly requesting it. If you need to install a copy of the standard Hyperterminal program, go to the Start menu, chose the setting option, and click on Control Panels option.

Double Click on the Add/Remove Programs icon and click on the Windows Setup tab at the top of the window. Hyperterminal is located in the Communications group.

Using the Hyper terminal

The program that starts Hyperterminal is

HYPERTRM.EXE. It is located under Start Menu;

Go to Start Programs Accessories

(communications) Hyperterminal.

53

Page 53
Image 53
Humax L3040 owner manual Serial Control Using RS-232C, Installing Hyper terminal, Using the Hyper terminal