How to Control Other Brand Products
Setting Up the MBR
CASE 1
Follow the process below when you know the remote control code of the product you want to control, or when you have the code table as on page 58~60.
Turn on the product you want to control.
Press the MENU + SEL buttons simultaneously for 2 seconds (until the function icons appear).
The MBR icon will appear and blink.
Press the SEL button. The word TV will appear in the product indication window.
Using the 
buttons, select the product you want to control (TV, VCR, DVD, CBL, SAT). Note that you
cannot set up the MBR for MNT.
Press the SEL button. The sign
Refer to the "MBR Code Table" to find the product's corresponding code, then input the
in sequence.
Press the SEL button. The current code is saved and the OK! sign appears.
Press the CANCEL button to finish the setup. Test the remote control.
If the remote control doesn't work with the product, return to step 2 above and set up the MBR repeatedly until you find the correct code.
To stop the process during the MBR setup, press the
CANCEL button.
If the remote control doesn't work after you have input all the codes in the "MBR Code Table," refer to CASE 2 on the following page.
19
