Humax L3040 owner manual Changing the Picture standard, Customizing the Picture

Picture

Changing the Picture standard

1

2

Press the MENU button.

Press the or button to select the PICTURE ( ) icon;

then press the SEL ( ) or button.

3	Press the or button to select Standard, Dynamic, Mild,
	or Custom picture setting.

NOTE : You can select a mode from among Middle, High, Low, or

Custom modes in RGB/DVI input Sources.

Quick Way

Press the PICTURE button on the remote control.

While pressing the button continuously, you can select the picture mode in the following sequence: Standard Dynamic Mild Custom

In RGB/DVI mode, you can select : Middle High Low Custom

Customizing the Picture

4	With Picture menu selected, press the or button to
	select an option (Contrast, Brightness, Sharpness, Color,
	or Tint-NTSC only) that you wish to change : then press the
	SEL (	) or button.

If you adjust the Contrast, Brightness, Sharpness, Color, or Tint (NTSC only) settings on the Picture menu, the picture standard is automatically switched to custom.

5 Press the or button to change the value of the item.

NOTE : In the PC/DVI mode, the Sharpness, Color, or Tint feature does not work.

After adjustment: Press the MENU button to exit.

30