SYSTEM CONFIGURATION (INDOOR UNIT)
IMPORTANT
Prior of making the electrical connections,
set the switch for heat pump unit or for cooling only unit.
This unit is valid for operating as a cold only or heat pump application.
The unit should be configured prior to making the electrical connections, by setting the configuration
switch as follows:
Switch 2
Switch 1
ON OFF
| SWITCH | ||
MODEL |
|
| |
1 | 2 | ||
| |||
COOLING ONLY | OFF | ON | |
(*) | |||
|
| ||
HEAT PUMP | ON | ON | |
|
|
| |
(*) Configuration from factory..
Check page 8 for more information about the situation of this switch.
NOTE:
If errors are made during the configuration of the system, switch off the main power supply, set
configuration switch in the correct position and then switch the power on.
4
