CONFIGURATION
The configuration menus allow you to set certain thermostat operating characteristics to your system or personal requirements.
To enter the User Configuration menu, press PROGRAM RUN to make sure the thermostat is in the run program mode, then press TIME FWD and TIME BACK at the same time to enter the configuration menu. The display will show the first item in the configuration menu.
The following chart (pages 24 & 25) describes each item on the menu and the applicable model(s). Set these according to your personal preference. To exit the menu, press PROGRAM RUN . To return to the menu at any time press PROGRAM RUN , then press TIME
FWD and TIME BACK at the same time. While in the configuration menu, if you do not press any buttons for two minutes, the thermostat will revert to normal operation.
23
You should contact a qualified service person to change items that are indicated “Recommend Installer
Setting”.
Operator may change shaded options if desired. We recommend that other options be set by the installer.
Configuration
