PROGRAMMING
MANUAL OPERATION
Your 
or 
to set the tempera- ture as desired.
PROGRAMMED OPERATION Planning Your Program
The sample schedule (pages 28 &
29)shows the factory installed programs for heating and cooling. The heating and cooling programs are separate, and must be pro- grammed individually. To use the factory program, set the clock and press PROGRAM RUN with the thermostat SYSTEM set to Heat,
Cool, or Auto.
Fill out the blank schedules (pages 30 & 31) with the time and temperatures you want in your program. Fill in every space for your program.
The same temperature can be repeated more than once if you do not want the temperature to change over several time periods.
Entering Your Program
To Set the Clock:
1.Press PROGRAM RUN .
2.Press SET TIME . The display will show the hour. Use TIME
FWD or TIME BACK to set to the current hour and AM/PM designa- tion.
26
3.Press SET TIME again. The display will show minutes. Use
TIME FWD or TIME BACK to set to the current minutes.
4.Press PROGRAM RUN .
To Set the Day:
5.Press SET DAY . The display will indicate a day of the week. Use
TIME FWD or TIME BACK to set to the current day of the week.
6.Press PROGRAM RUN .
To Set the Program:
7.Press SYSTEM to select HEAT (for heating program) or COOL (for cooling program).
8.Press PROGRAM VIEW one time. The display will show MOR
