TUNER MODE ________________________________________________________________
Selecting the Tuner as the source
ST
F M 8 7 . 5 0MHz
FLAT
ST
F M | P 0 2 |
| FLAT |
MONO
F M 8 9 . 2 0MHz
FLAT
1Select the input source using the » TUNER BAND« button.
– Display: the radio station last selected.
Selecting a preset station
1Select the frequency band (FM or MW) by pressing the » TUNER BAND« button.
2Select the preset position by pressing the » NEXT PRESET« button on the device.
–Display: briefly the preset position, then »FM 87.50« or the name of the station.
or
Select the preset position directly using »1...0, +10« on the remote control.
–Display: briefly the preset position, then »FM 87.50« or the name of the station.
Stereo/mono reception
If the device is receiving an FM stereo programme »ST« appears in the display. However, if the signal from the FM stereo station is weak, you can improve the sound quality by switching to mono reception.
1Press »STEREO/MONO« on the remote control to switch to mono recep- tion.
–Display: »MONO«.
2To switch back to FM stereo press »STEREO/MONO« on the remote control.
–Display: »ST«.
18
