SETTINGS____________________________________________________________________________
CLOCK
0
0 0
CLOCK
1 4
0 2
Setting the clock
When the stereo is connected to the mains supply and the time has not been set, the time and »CLOCK« flash in the display.
1With the device switched off, press and hold down » CLOCK«.
– Display: »CLOCK«, the time flashes.
2Set the hours using » s6 «.
3Set the minutes using » 5a «.
4Press » CLOCK« to confirm. Display: »CLOCK« and the time.
5You can show or hide the time by pressing » CLOCK« when the device is on.
Note:
You must reset the time after a power failure or when the mains plug is pulled out.
Automatically updating the time
RDS
ST
C T O N
FLAT
Some RDS stations transmit RDS time information. This function enables you to automatically update the time on the device in RDS mode.
1Press » CT« on the remote control to switch RDS time on and off when the stereo system is in tuner mode.
Note:
The time display is transmitted by the station once a minute. You must receive the RDS station for several minutes before the time information can be transferred to the stereo system (see also page 19).
ENGLISH
13
