TUNER MODE_____________________________________________________________________________
RDS time
Some stations transmit RDS time information.
RDS CT | CLOCK |
|
ST | 1 4 0 2 |
|
|
| |
| FLAT |
|
|
|
|
RDS
ST
N O C T
FLAT
RDS RT
ST
M A I L T O
FLAT
RDS
ST
N O R T
1To call up RDS time information, keep pressing »DISPLAY« on the remote control until »CT« appears in the display.
– After a short time you will see the current time in the display.
Note:
The time display is updated every minute. The accuracy depends on the information transmitted by the station itself. You must be tuned to the RDS station for several minutes before the time information can be received.
If no RDS information is transmitted, »NO CT« appears in the display, »CT« goes out and the name of the station appears after a short time.
Radiotext
Some RDS stations transmit information known as Radiotext. This is additional information about the station and its programmes. Radiotext appears as ticker text in the display. As this information is transmitted character by character, it may take some time before the text is received in full.
1To call up Radiotext keep pressing »DISPLAY« on the remote control until »RT« appears in the display.
– The information appears after a short time.
Note:
If reception is poor there may be gaps in the Radiotext message.
If no Radiotext is transmitted, »NO RT« appears in the display, »RT« goes out and the name of the station appears after a short time.
FLAT
20
